Family-owned since 1988   ·   Toronto & the GTALet’s talk about your facility   (416) 652-5131
Commercial cleaning services

Post-construction cleaning

Final cleaning for commercial handovers and occupied-space renovations.

Construction cleaning works best when the handover sequence is clear. We review remaining trades, dust conditions, access and finish requirements before agreeing to a practical cleaning plan.

Request an assessment
Branded cleaner using a filtered vacuum during a finished commercial fit-out handover
Commercial relationships
across the GTA

Plan the clean around the trades and your handover

Commercial renovations, office fit-outs and suitable new spaces.

Construction waste removal, hazardous material remediation and specialist repairs are excluded unless specifically assessed and included.

Your written proposal confirms the surfaces, tasks, frequency, access, exclusions and pricing.
How we manage quality
Methods & service guidelines

The detail behind
post-construction cleaning.

Commercial post-construction cleaning prepares agreed areas for a walkthrough or occupancy after renovations and fit-outs. It is coordinated with the handover sequence so cleaning is not repeatedly undone by active trades or unfinished dusty work.

We assess the remaining dust, accessible surfaces, finishes and debris before proposing the work. A controlled high-to-low approach, suitable dust collection and surface-compatible detail cleaning support an organized final clean.

Confirm readiness and hazards

Review trade completion, access and known material hazards. Hazardous dust, asbestos, lead and specialist remediation are outside an ordinary final-clean scope.

Protect new finishes

Follow finish-care instructions and test suitable areas where appropriate. Paint, adhesive or stubborn construction deposits are assessed before abrasive or chemical removal is proposed.

Agree on the handover sequence

Define whether the project includes an initial clean, final detail clean or a later touch-up. Waste removal, trades activity and re-soiling responsibilities should be clear.

Before the service

Confirm substantial completion of dusty work, safe access, power and water availability, finish instructions and which debris the contractor will remove.

At the final check

Walk the included areas with the agreed contact, identify remaining defects versus cleaning tasks and record any separately required return visit.

These guidelines explain the service approach. Site-specific instructions, product labels, surface-care requirements and the written proposal determine the method used at your facility.

How the service works

A clear process.
From assessment to review.

The method is adapted to your surfaces, access and written scope. This is the planning framework we discuss at your walkthrough.

  1. Check handover readiness

    Review the work stage, remaining trades, dust conditions and access. Confirm that the space is suitable for the agreed final-cleaning work.

  2. Define the boundaries

    Agree on construction-waste removal, sensitive finishes and exclusions. Hazardous materials and specialist remediation require separate assessment.

  3. Remove loose dust

    Use suitable dust-capture methods and a high-to-low sequence. Work around completed surfaces without damaging new finishes.

  4. Detail the space

    Clean the agreed fixtures, accessible glass, trim and floors. Assess stubborn residues before selecting a removal method.

  5. Walk the completed areas

    Review the result with the site contact where arranged. Identify re-soiling risks from remaining trades and quote return visits separately when needed.

What this gives your team

A clear final-cleaning scope and a coordinated handover, with remaining trades and return-clean requirements identified.

See how we support the service
A little more clarity

Good questions.
Clear answers.

Can this be added to recurring cleaning?

Yes. We can discuss this service alongside a recurring janitorial program, with the timing and scope specified in your proposal.

How do you price the work?

We review the area, condition, frequency, access and operating constraints. A site walkthrough helps us prepare a quote that reflects the work required.

Which areas do you cover?

We serve Toronto and the GTA. Ask us about your facility or explore our service areas below.

Schedule the clean around your handover

Initial clean

Once agreed areas are released by the trades, remove approved light debris and settled dust from accessible surfaces. Confirm who handles bulk construction waste.

Final detail clean

Detail frames, ledges, millwork, fixtures and interior glass. Vacuum or damp-clean floors using methods suited to the new finishes and their curing requirements.

Handover and touch-ups

Walk the agreed areas with your superintendent or facility contact. Document items needing a trade and schedule touch-ups separately where other work continues.

For a quote, share the floor area, surface finishes, trade completion date, waste arrangements and target occupancy date.

A better-managed cleaning program

Let’s walk your facility.

Show us your space. Tell us what you need. We’ll build the scope together.

Request an assessment
Speak to Ergo Clean

Sample facility inspection

Ergo CleanILLUSTRATIVE SAMPLE

Facility inspection

Weekly review · Sample workplace
94/100
AreaFindingStatus
WashroomsFixtures & supplies checkedComplete
LunchroomTouchpoints checkedComplete
East entranceFloor detail needs attentionFollow-up
Photo + finding + corrective actionExample only

Illustrative only. Actual reporting is customized to the facility and scope.